Rubber dust boot for B&M Ripper & Precision Sport shifters - 3.1" dia housings

This item is sold out; it may be a few months until it returns

B&M replacement dust cover boot 4100508-00, for ~3 1/8" diameter housings. I don't have the spring clips for them, but if you don't have one you could just use a cable tie - I can include one upon request. There is a smaller version of this boot, for ~2 5/8" diameter housings, so be sure you know what you need. This is NOT a trim boot. It is NOT a console boot. It is NOT a floor boot. The part you are replacing should look identical to it. ***

The following B&M shifters use this boot:

  • 45040 - Dodge Ram SRT-10 w/ T56
  • 45043 - 2004-2006 Pontiac GTO
  • 45048 - 2000-2004 Jeep Wrangler w/ NV3550 (other Jeep shifters use the smaller boot)
  • 45050 - 1983-2004 Mustang w/ T5 & T45
  • 45051 - 1983-2002 Camaro w/ T5
  • 45052 - 1993-2002 Camaro w/ T56
  • 45053 - 2003-2004 Mustang Cobra w/ T56
  • 45054 - 1983-2004 Mustang w/ TR3550 conversion
  • 45072 - 2001-2004 Mustang V8 w/ TR3650
  • 45108 - 1998-2003 Chevy S10 & GMC S15 truck w/ NV1500 or NV3500

This boot is not a trim boot but rather a protective dust cover to keep dirt out of the shifter mechanism. A "lower boot" that fastens to the floor is still required to isolate the passenger compartment.

We Also Recommend