PLAIN chrome shifter stick #0085 on a bracket for trucks:

• 15" tall, bends 10" rearward & 0.5" left
  • 3/8"-16 knob threads
• Forged mild steel - case-hardened for toughness, chrome-plated for beauty
  • Bracket does NOT have mating serrations - mount onto smooth face of stub
    • PLAIN sides - NO LOGO - NOT a Hurst part!
      
  • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
• Great for custom installations - measure before you buy!
  • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
  • Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
  • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
  • Stick length = 18" (distance from mount to knob)
• Similar to stick #0295 but harder rear angle and vertical knob thread - see 2nd & 3rd pic for comparison

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.

This stick can replace original stick #0295 on the following internal rail shifters - matching base required, not compatible with stock shifters (see separate listings for complete kits):

• Core Shifters kits for 1994-2008 Dodge Ram
• Core Shifters kits for 1988-2007 GM C/K & Silverado / Sierra (tall upgrade)
  
• Core Shifters kits for 1999-2007 Ford Super Duty