Menu
Cart

Hurst Black Stick # 0050

  • $ 4715


Hurst black steel short shifter stick # 0050:

  • ~5" tall, dead straight
    • 12mm x 1.25 knob thread (OE on most 2005+ Mustang)
  • Forged mild steel - case-hardened for toughness, black e-coat paint finish
    • Mating serrations for Hurst stub mount are stamped into one side
    • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
  • Great for custom installations - measure before you buy!
    • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
    • Many off-brand shifters use 8mm stick bolts - special adapter bolts are included
    • Great alternative to GM # 19301622 for T56 Magnum installations (request 3/8" bolts)
    • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height - see swap bases for fulcrum options
  • Bulk part, no retail pkg

    IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.

    This stick is found in Hurst kit # 3910204 for 2011-2014 Mustang and can replace the # 7201 chrome stick found in kits # 3910201 & 3915201 as well, to use the stock knob in 2005-2010 models w/ Hurst shifter.

    • Only fits GT500 or Hurst shifters; does NOT FIT any other stock Mustang shifter!
    • FITS GT500 stock shifters - all years
      • For 2007-2009 GT500 this stick offers a solid mount, eliminating the rubber isolator & enhancing tactile control - accepts stock knob
      • For 2010-2014 GT500, this stick offers a solid mount AND converts knob threads from the OE 10mm x 1.25 to the "old" 12mm x 1.25 threads (does NOT accept stock knob)
    • Fits some aftermarket GT500 shifters (Shelby, Pro5.0, Steeda, Drake)
    • GT500 instructions & 8mm mounting hardware included
    • See my other listings for shift knobs
      • NOTE: 2007-2009 GT500 has large boot opening; 2010-2014 has small boot opening. Aftermarket knobs for 2010-2014 will require a small boot retainer, often marketed for GT Premium w/ 401A premier trim - round knob)

    I also sell complete stick kits w/ knob or Hurst pistol grip for all GT500 & Hurst HardDrive kit for 2010-2014 GT500!


    Complete your installation with a "HURST EQUIPPED" emblem!


    We Also Recommend