Menu
Cart

Hurst Chrome Stick # 7436

  • $ 7727


Hurst chrome shifter stick # 7436:

  • ~10" tall, bends 5" rearward & 2" left
    • 3/8"-16 knob threads
  • Forged mild steel - case-hardened for toughness, chrome-plated for beauty
    • "HURST" imprinted on both sides in mid-section
    • Mating serrations for Hurst stub mount are stamped into left side
    • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
  • Great for custom installations - measure before you buy!
    • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
    • Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
    • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
    • Stick length = 11.2" (distance from mount to knob) - see swap bases for fulcrum options
  • Genuine Hurst part in bulk form - no retail pkg

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.


This stick is used by the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog):

  • 3917438 for 1969 Camaro & Firebird (muncie 4 speed w/ & w/o console)
  • 3917438 for 1973-77 Camaro & Firebird‚ (saginaw 4 speed w/ console)
  • 3667954 for 1968-72 Chevelle w/ muncie 3 speed only, w/o console
  • similar to stick # 0100 found on shifter 4070009 for Richmond 5 speed

NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.


This stick is also used by the following Hurst & Core internal rail shifters - matching base required, not compatible with stock shifters (see my other listings for complete kits):

  • 3912003 Blackjack shifter for 1970-1981 Camaro w/ TKO   
  • 3912010 Blackjack shifter for 1969 Camaro w/ TKO   
  • 3913001 Blackjack shifter for 1970-1981 Camaro w/ Magnum   
  • 3913008 Blackjack shifter for 1969 Camaro w/ Magnum
  • Core Shifters kit for 1985-1987 Ford Ranger 4x4 w/ FM145

*** I ALSO OFFER THE "OLD SCHOOL" ROUND BAR VERSION OF THIS STICK IN MY OTHER LISTINGS under # 7438***


Complete your installation with a "HURST EQUIPPED" emblem!


We Also Recommend