Menu
Cart

Hurst Chrome Stick # 7236

  • $ 7898


Hurst chrome shifter stick # 7236:

  • 11" tall, bends 2.25" rearward
    • 3/8"-16 knob threads
  • Forged mild steel - case-hardened for toughness, chrome-plated for beauty
    • "HURST" imprinted on both sides in mid-section
    • Mating serrations for Hurst stub mount are stamped into left side
    • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
  • Great for custom installations - measure before you buy!
    • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
    • Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
    • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
    • Stick length = 11.4" (distance from mount to knob) - see swap bases for fulcrum options
  • Genuine Hurst part in bulk form - no retail pkg

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.


This stick is used by the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog):

  • 3917307 & 3667271 for 1959-60 El Camino
  • 3917308 for 1964-1967 Chevelle & El Camino w/ muncie trans, w/ & w/o console
  • 3917307 for 1966-1967 Chevelle & El Camino w/ saginaw trans, w/ & w/o console
  • 3917930 for 1968-1972 Chevelle & El Camino w/ saginaw trans, w/ & w/o console - see stick # 8009 for w/ muncie
  • 3667271 for 1966-1974 Chevelle & El Camino w/ 3 speed floor conversion
  • 3917308 for 1964-1967 Nova / Chevy II w/ muncie trans, w/ & w/o console
  • 3917308 for 1960-1964 Pontiac full size w/ T10, w/o console
  • 3917307 & 3917308 for 1964-1966 Lemans / Tempest / GTO, Olds F85 & 442, Buick Gran Sport / Special / Skylark, various combinations - see catalog
  • 3917308 for 1959-1964 Studebaker Hawk w/ bucket seats

When used in combination with Hurst base # 3915403 (& the correct Hurst installation kit) this stick can replace the following OE Hurst sticks on vehicles without console - SEE HURST CATALOG:

  • # 2315 - 1964 Lemans or GTO - 4 speed, buckets w/o console + early 65 buckets w/o console
  • # 2316 - 1964-66 Tempest or Lemans - 4 speed w/ bench
  • # 3232 - 1965-66 Lemans or GTO - 4 speed, buckets, w/o console
  • # 3742 - 1966 Lemans or GTO - 3 speed, buckets, w/o console
  • # 3759 - 1966-69 Olds - F85, Cutlass, Cutlass Supreme - 3 speed "HD" or 4 speed muncie, all seating, w/o console
  • # 3760 - same as 3759 w/ 442 on sides, 1966-69 442
  • # 5335 - 1967-72 Buick GS & Skylark (very limited info, mating parts unclear)

NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.


This stick is also used by the following Hurst internal rail shifters - matching base required, not compatible with stock shifters (see my other listings for complete kits):

  • 3912001 Blackjack shifter for 1959-1964 Impala w/ TKO
  • 3912002 Blackjack shifter for 1965-1969 Impala w/ TKO   
  • 3912005 Blackjack shifter for 1964-1967 GM A-body w/ TKO   
  • 3913002 Blackjack shifter for 1964-1967 GM A-body w/ Magnum   
  • 3913005 Blackjack shifter for 1959-1964 Impala w/ Magnum   
  • 3913006 Blackjack shifter for 1965-1969 Impala w/ Magnum

Complete your installation with a "HURST EQUIPPED" emblem!


We Also Recommend