Hurst Chrome Stick # 0090
Hurst chrome shifter stick # 0090:
- 12.4" tall, bends 6.8" rearward & 2.2" left
- Begins to bend rearward ~5" up from lower hole
- Identical in shape to aluminum stick # 0180 (discontinued)
- Very similar in shape to chrome stick # 8022 (12" tall, bends 7.5" rearward & 2" to left) - but $20-30 cheaper
- Want something like this but a little taller? Check out # 4077
- 3/8"-16 knob threads
- Forged mild steel - case-hardened for toughness, chrome-plated for beauty
- "HURST" imprinted on both sides in mid-section
- Mating serrations for Hurst stub mount are stamped into left side
- WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
- Great for custom installations - measure before you buy!
- Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
- Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
- Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
- Stick length = 14.2" (distance from mount to knob) - see swap bases for fulcrum options
- Genuine Hurst part in bulk form - no retail pkg
IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.
This stick was used by the following Hurst internal rail shifters - matching base required, not compatible with stock shifters (see complete kits):
- 3910033 for 1982-1995 S10 pickup w/ T5
- 3910140 for 2000-2004 Jeep Wrangler w/ NV1500 & NV3550
- 3915040 for 1989-1999 Jeep Wrangler w/ AX-15
- 3915043 for 1987-2004 Jeep Wrangler w/ AX-5
- Core Shifters kits for Wrangler no longer use this stick
- Optional for many trucks w/ body lift (kits that normally use stick # 4106 - Jeep Cherokee, Toyota trucks, Chevy Colorado, Ford Ranger)
The similar # 8022 stick is used by the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog):
- 3668034 for 1965-69 Dodge Coronet & Plymouth Belvedere w/ 3 speed
- Bolt-on version of stick used by 3913180 for 1965-73 Mustang & 1966-1973 Fairlane
- Does NOT mean it fits these vehicles, just that it was created from that design
- For trans swaps etc stated application is irrelevant- measure before you buy!
NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.
Complete your installation with a "HURST EQUIPPED" emblem!
We Also Recommend