Chrome Stick #0291

Hurst chrome shifter stick #0291:

  • 13" tall, bends 8" rearward & 3" left
    • Almost identical to Hurst chrome stick #0290 (discontinued)
    • FYI Hurst stick #4106 is virtually this stick cut 4" shorter (same rearward angle)
    • 3/8"-16 knob threads
  • Forged mild steel - case-hardened for toughness, chrome-plated for beauty
    • "HURST" imprinted on both sides in mid-section
    • Mating serrations for Hurst stub mount are stamped into left side
    • WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
  • Great for custom installations - measure before you buy!
    • Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
    • Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
    • Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
    • Stick length = 15.0" (distance from mount to knob) - see swap bases for fulcrum options
  • Hurst #2380291 without retail pkg

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.

This stick is used by the following Hurst & Core internal rail shifters - matching base required, not compatible with stock shifters (see complete kits):

  • 3910110 for 1990-1993 GM S10 truck w/ NV3500 trans
  • 3910120 for 1988-1992 GM C/K truck w/ HM290 or 5LM60 trans
  • 3910121 for 1993-1994 GM C/K truck w/ NV3500 trans

We Also Recommend