PLAIN chrome shifter stick #7236:

• 11" tall, bends 2.25" rearward
• 3/8"-16 knob threads
• Forged mild steel - case-hardened for toughness, chrome-plated for beauty
• PLAIN sides - NO LOGO - NOT a Hurst part!
• Mating serrations for Hurst stub mount are stamped into left side
• WARNING: Do not weld, bend, or modify a case-hardened part like this as it will create a weak spot that can lead to catastrophic failure
• Great for custom installations - measure before you buy!
• Mounts via 3/8" bolt holes spaced 7/8" apart - fits any aftermarket Hurst stub
• Many off-brand shifters use 8mm stick bolts - requiring special adapter bolts
• Mix parts carefully as proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
• Stick length = 11.4" (distance from mount to knob) - see swap bases for fulcrum options
• Interchanges with Hurst #5387236
  

IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed - sit in vehicle with tape measure while studying Hurst catalog - stick section.

This stick is used by the following external linkage Hurst shifters for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit (see Hurst catalog):

• 3917307 & 3667271 for 1959-60 El Camino
• 3917308 for 1964-1967 Chevelle & El Camino w/ muncie trans, w/ & w/o console
• 3917307 for 1966-1967 Chevelle & El Camino w/ saginaw trans, w/ & w/o console
• 3917930 for 1968-1972 Chevelle & El Camino w/ saginaw trans, w/ & w/o console - see stick #8009 for w/ muncie
• 3667271 for 1966-1974 Chevelle & El Camino w/ 3 speed floor conversion
• 3917308 for 1964-1967 Nova / Chevy II w/ muncie trans, w/ & w/o console
• 3917308 for 1960-1964 Pontiac full size w/ T10, w/o console
• 3917307 & 3917308 for 1964-1966 Lemans / Tempest / GTO, Olds F85 & 442, Buick Gran Sport / Special / Skylark, various combinations - see catalog
• 3917308 for 1959-1964 Studebaker Hawk w/ bucket seats

When used in combination with Hurst base #3915403 (& the correct Hurst installation kit) this stick can replace the following OE Hurst sticks on vehicles without console - SEE HURST CATALOG:

• #2315 - 1964 Lemans or GTO - 4 speed, buckets w/o console + early 65 buckets w/o console
• #2316 - 1964-66 Tempest or Lemans - 4 speed w/ bench
• #3232 - 1965-66 Lemans or GTO - 4 speed, buckets, w/o console
• #3742 - 1966 Lemans or GTO - 3 speed, buckets, w/o console
• #3759 - 1966-69 Olds - F85, Cutlass, Cutlass Supreme - 3 speed "HD" or 4 speed muncie, all seating, w/o console
• #3760 - same as 3759 w/ 442 on sides, 1966-69 442
• #5335 - 1967-72 Buick GS & Skylark (very limited info, mating parts unclear)

NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned. Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.

This stick is also used by the following Hurst internal rail shifters - matching base required, not compatible with stock shifters (see complete kits):

• 3912001 Blackjack shifter for 1959-1964 Impala w/ TKO
• 3912002 Blackjack shifter for 1965-1969 Impala w/ TKO
• 3912005 Blackjack shifter for 1964-1967 GM A-body w/ TKO
• 3913002 Blackjack shifter for 1964-1967 GM A-body w/ Magnum
• 3913005 Blackjack shifter for 1959-1964 Impala w/ Magnum
• 3913006 Blackjack shifter for 1965-1969 Impala w/ Magnum